DTF vs Screen Print vs Embroidery: Which Is Right for Your Order?

For most small orders and full-color art, DTF transfer printing is the flexible choice: no minimum, no screen fees, and it works on cotton, polyester, and blends. Screen printing is the classic option for larger runs of simple, bold logos. At Just Tees for All, that means professionally made plastisol screen-print transfers that we heat-press in our studio, starting at 48 pieces per design, same print size, any mix of shirt sizes. Embroidery is the stitched, professional look for polos, hats, and jackets, with no minimum and a one-time digitizing fee.

A quick comparison

DTF

Best for
Full-color art, photos, gradients, and small runs
Quantity
No minimum
Colors
Unlimited color, including photos; no screen fees
Feel
Soft and stretchy
Durability
Holds up when pressed and cared for properly
Cost direction
No screen fees; cost follows the print, not the color count

Screen print

Best for
Simple, bold logos for teams, schools, events, and staff shirts
Quantity
Starts at 48 pieces per design; same print size; any mix of shirt sizes
Colors
A few solid colors; opaque ink that stays bright on dark shirts
Feel
Thick, opaque plastisol ink with a classic printed look
Durability
Meant to stay bright wash after wash
Cost direction
Often a better per-piece price in volume; $50 screen setup per color

Embroidery

Best for
A premium logo on polos, hats, jackets, and bags
Quantity
No minimum — one piece or hundreds
Colors
Thread colors; priced by logo size (stitch count)
Feel
Raised, textured stitching
Durability
Stitched into the fabric; holds up wash after wash
Cost direction
One-time $30 digitizing fee per new logo; price follows stitch count

A $20 artwork fee applies only if your art needs changes, and it is waived on DTF gang sheet orders of $100 or more. Get a Quote.

DTF: full color, no minimum

A DTF printer printing RPM Heating and Cooling and Wellington National Golf Club logos onto transfer film.

Direct-to-film (DTF) printing puts your design on a special film, coats it with adhesive, then heat-presses it onto the garment. We print everything in-house on our Prestige R2.

Choose DTF for photos, gradients, or many colors; for a small run, a one-off, or individual names and numbers; and for cotton, polyester, or blends, light or dark. On performance or dry-fit shirts, DTF usually works best because it stays flexible on polyester and handles full-color art. Have your own heat press? Order ready-to-press transfers on a gang sheet (12.5 inches wide, any length), or we can press them onto your garments. DTF transfers are ready in 24–48 hours.

See DTF Transfer Printing, or custom shirts in Wellington for how local teams use DTF.

Screen print: bold logos on larger runs

A close-up of a light blue shirt on a heat press, printed with a Pool Doctor of the Palm Beaches back design and partner logos for Schiller Pools, Cristallo, and PolyVyro Finishes.

Screen printing is the classic look for team shirts, staff uniforms, and event tees: thick, opaque ink that stays bright wash after wash. It fits volume orders with a few solid colors. Orders start at 48 pieces per design. Each design is printed at one size, and it can go on any mix of shirt sizes. After you approve a mockup, a screen is made for each color, the transfers are printed, and we heat-press them onto your garments with commercial presses. After artwork approval, screen printing typically takes 5–7 business days.

Need full color, photos, or gradients? We'll steer you to DTF. Want a textured logo on polos, jackets, or caps? We'll point you to embroidery. See our screen printing page.

About heat-pressed screen-print transfers

Some customers hear "heat-pressed" and picture a cheap iron-on that peels after a few washes. That is not what we do.

Our screen prints start as professionally made plastisol screen-print transfers. A dedicated shop prints real plastisol ink — the same type used in traditional screen printing — onto a carrier, and we apply those transfers with commercial heat presses in our studio, rather than printing straight onto the garment. With the right heat, time, and pressure, the ink bonds to the garment, leaving a slightly raised plastisol print — the classic screen-print feel, not a vinyl sticker.

Cracking or peeling usually means the wrong heat, time, or pressure, or a low-quality iron-on. Pressed correctly, these transfers hold up with regular wear and washing. They may not match a direct press print in every respect, but they are real plastisol screen prints, not a shortcut substitute. Wash inside out in cold or warm water, skip bleach and high heat on the design, and do not iron directly on the print or stitching.

Embroidery: a logo that is stitched, not printed

A grey polo with a left-chest embroidered Kemp Signs and Service logo in blue and yellow.

Embroidery turns your logo into a stitch file and sews thread into the garment. It gives a premium finish on polos, hats, jackets, bags, and uniforms. We stitch in-house on our Ricoma machines, and you see a digital mockup before anything is stitched. Every new logo has a one-time $30 digitizing fee; reorders of the same logo do not need it again. There is no minimum. After artwork approval, embroidery typically takes 7–10 business days. A sample stitch is available on request after payment. For caps and trucker hats, you can choose an embroidered or a pressed logo. See our custom embroidery page.

You can also mix methods on one order — for example, embroidered polos plus DTF tees, or hats to match your shirts.

Local help, from quote to pick-up

Just Tees for All is based in Royal Palm Beach. We offer drop-off and pick-up by arrangement, serving Royal Palm Beach, Wellington, Loxahatchee, Loxahatchee Groves, The Acreage and West Palm Beach. We also ship across Florida and nationwide. Get a Quote: send your logo, garments, and quantity, and we'll reply with pricing and a mockup.

Frequently asked questions

Which is cheapest for small orders?

DTF is usually the most practical choice, because there is no minimum and no screen fees. Embroidery also has no minimum, but a new logo has a one-time $30 digitizing fee. Screen printing starts at 48 pieces per design. Each design is printed at one size, and it can go on any mix of shirt sizes. Screen setup is $50 per color, so it typically fits volume orders.

Which lasts longest?

There is no single wash-count winner. Embroidery is stitched into the fabric. Professionally made plastisol screen-print transfers and quality DTF prints also hold up well when applied correctly and cared for.

Can you do full-color photos?

Yes. DTF prints full-color photos, gradients, and fine detail, with no screen fees. Screen print transfers are best for a few solid colors. Embroidery is a stitched logo, not a photo print.

What works best on polos and hats?

Embroidery is the usual choice for a polished logo on polos, caps, jackets, and bags. For caps and trucker hats, you can choose an embroidered or a pressed logo.

Can I mix methods?

Yes. You can mix methods on one order — for example, embroidered polos plus DTF tees, or hats to match your shirts.

Can you print on dark shirts?

Yes. Screen print ink is opaque, so it stays bright on black, navy, and other dark colors. DTF also works on light or dark cotton, polyester, and blends.

Which method is best for performance or dry-fit shirts?

DTF usually works best on polyester performance fabric. It stays flexible and handles full-color art and player names.

Questions? Call/Text 561-701-TEES (561-701-8337) or Get a Quote.

Search
Search